| 8 0823 08 Rollix Slewing Ring Bearings | D:90mm; Grease Limiting Speed (r/min):6700; B:23mm; Seals or Shields:Open Type; Cage Type:Steel; SKU:1308jc3-nsk; Availability:In Stock; Oil Limiting Speed (r/min):8500; d:40mm; Static Load Rating (kN):9.7; Weight:0.02 KGS; Clearance:C3; Dynamic Load Rating (kN):29.8; |
| 6 0980 09 Rollix Slewing Ring Bearings | Weight:21.10 KGS; B:88mm; Clearance:C2; d:170mm; Availability:In Stock; Reference Speed Rating (r/min):1600; D:280mm; SKU:23134kejw33c2-timken; Static Load Rating (kN):1710; Cage Type:Steel; Seals or Shields:Open Type; Limiting Speed Rating (r/min):1400; Dynamic Load Rating (kN):1220; |
| 6 1116 Rollix Slewing Ring Bearings | Clearance:C3; B:144mm; d:260mm; SKU:23152-k-mb-c3-qbl; Weight:0.02 KGS; Availability:In Stock; Seals or Shields:Open Type; D:440mm; Cage Type:Brass; |
| 11.50.2987.001.49.1502 Standard 5 Slewing Ring Bearings | D:85 mm; Inside Ring Outside Diameter:54.5 mm; Static Load Rating:66,500 N; ra (max):1 mm; Enclosure:Open; Radial Clearance:0.050 to 0.080 mm; Da (max):78 mm; B:19 mm; dd (min):61 mm; Dynamic Load Rating:63,000 N; r1:1.1 mm; dc (min):57 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Limiting Speed - Grease:7,000 rpm; Fillet Radius/Chamfer:1.1 mm; Limiting Speed - Oil:8,500 rpm; db (min):52 mm; |
| 2 052 Rollix Slewing Ring Bearings | D:9.5000 in; da - Cone Frontface Backing Diameter:6.14 in; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)5:134000 lbf; D1 - Flange Outer Diameter:9.8710 in; Y - ISO Factor9:1.88; Cup Part Number:HM231115-B; C - Cup Width:1.7500 in; C1 - Cup Flange Width:0.3750 in; Design Units:Imperial; e - ISO Factor8:0.32; Da - Cup Frontface Backing Diameter:8.84 in; R - Cone Backface To Clear Radius1:0.14 in; |
| 2 0245 Rollix Slewing Ring Bearings | Sleeve:S-40 x 7 1/8; S:1.344 in; Locknut:AN-40; Bearing Number:22240K; SNW/SNP Assembly Weight:30.5 lb; B2:5.474 in; Lockwasher and Lockplates:W-40; Series:222K; Taper:1:12; D1:9.849 in; Diameter d :7 1/8 in; Tolerance1:-0.005 in; |
| 191.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | Bearing UPC:013992059086; Housing Width:6.5 in; Bolt Size:4 x 1; Seal Type:High Temperature Pac; Note:This product line wa; Shaft Size:5-3/16 in; Bearing Type:Split Cylindrical Re; Dimension J2 :16-3/4 in; Dimension H2:14.2 in; Support Type:Four-Bolt Plummer Bl; Dimension L :21-3/4 in; Dimension K :3-3/4 in; Dimension J1 :18-1/2 in; Cr - Dynamic Load Rating:95055 lbf; Dimension H :6-5/16 in; |
| 32 0411 01 Rollix Slewing Ring Bearings | Weight:0.20 KGS; Clearance:Standard; D:8mm; Seals or Shields:Two Rubber Seals; Cage Type:Steel; B:3mm; SKU:smr84-2rs-zen; d:4mm; Availability:In Stock; |
| 6 0307 Rollix Slewing Ring Bearings | Static Load Rating:510,000 N; Limiting Speed - Grease:3,100 rpm; Dynamic Load Rating:500,000 N; Nr. of Holes:4; da (min):107 mm; d:95 mm; B:55.6 mm; Da (max):158 mm; Hole Diameter (do):5 mm; Axial Load Factor Y0:2.19; Enclosure:Open; Weight:5.460 kg; Axial Load Factor Y2:3.34; Roller Profile:Symmetric; Radial Clearance:0.080 to 0.110 mm; Groove Width A:10 mm; Axial Load Factor Y1:2.24; Constant e:0.30; |
| 191.50.6300.990.41.1502 Standard 5 Slewing Ring Bearings | Weight:0.490 kg; d:40 mm; Limiting Speed - Oil:9,000 rpm; db (min):47 mm; Radial Clearance:0.025 to 0.050 mm; ra (max):1 mm; dc (min):52 mm; Static Load Rating:62,000 N; Limiting Speed - Grease:7,500 rpm; Configuration:Single Row; D:80 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:58,000 N; Enclosure:Open; dd (min):56 mm; Fillet Radius/Chamfer:1.1 mm; B:23 mm; ra1 (max):1 mm; db (max):49 mm; |
| No. | Brand | N | H | e | G | J | C | A | E |
| 1 213 | Rollix | - | - | - | - | - | - | - | - |
| 2 0935 | Rollix | - | - | - | - | - | - | - | - |
| 8 0574 08 | Rollix | - | - | - | - | - | - | - | - |
| 38 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 23 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 25 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 121.40.4500.990.41.1502 | Standard 5 | 18 mm | 271 mm | - | M16 | 350.00 mm | - | 185.00 mm | - |
| 192.32.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 34 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 23 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 121.36.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.2795.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 7 1997 04 | Rollix | - | - | - | - | - | - | - | - |
| 31 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 11.40.2915.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 31 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 26 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 38 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 0555 01 | Rollix | - | - | - | - | - | - | - | - |
| 29 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 32 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 2 0626 01 | Rollix | - | - | - | - | - | - | - | - |
| 7 0946 05 | Rollix | - | - | - | - | - | - | - | - |
| 192.32.3550.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 22 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 141 | Rollix | - | - | - | - | - | - | - | - |
| 26 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 21 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 6 2002 | Rollix | - | - | - | - | - | - | - | - |
| 7 1830 04 | Rollix | - | - | - | - | - | - | - | - |
7 0673 Rollix Slewing Ring Bearings Video
The 10 Best Places near Haugerudsentret 1-7, 0673 Oslo, Norway ...
Browsing all of Haugerudsentret 1-7, 0673 Oslo, Norway - Tim Wendelboe, Himkok, Illegal Burger, Døgnvill Burger Vulkan, Habsak, Lille Saigon 1, ...
Clinical analysis of Kimura's disease in 24 cases from China
by G Zhang · 2020 · Cited by 14 — Lesion diameter ranged from 0.6 cm to 7 cm with unilateral involvement ... BMC Surg 20, 1 (2020). https://doi.org/10.1186/s12893-019-0673-7.
Margin Trimmer #105/106 hdl #7 orange, mesial, 1mm - Hu ...
Cod MT105/0673. Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled.
Microwave-to-optics conversion using a mechanical oscillator ...
by M Forsch · 2020 · Cited by 159 — Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication and for connecting ...
1955 Bowman 13 Clyde Vollmer PSA 7 (0673) | eBay
Find many great new & used options and get the best deals for 1955 Bowman 13 Clyde Vollmer PSA 7 (0673) at the best online prices at eBay!
Auto 7 301-0673 A/C Drive Belt
The Auto 7 A/C drive belt is the perfect OE replacement if you need a new A/C drive belt. Auto 7 is a supplier of original equipment quality parts for ...
RM-SC-122 - HIROSE Electric Group [Connector]
CL0109-0673-7-00. Basic Specifications. Connector Type; Contact; Parts; Generic Type; Industry Standard; Safety Standards; Performance Characteristics ...
DJO 11-0673-7 - McKesson Medical-Surgical
Knee Brace DonJoy® Economy Left or Right Knee Hook and Loop Strap Closure 29-1/2 to 32 Inch Thigh Circumference / 21 to 23 Inch Mid-Patella Circumference ...Features: Indications: mild MCL and/or LCL sp...Manufacturer #: 11-0673-7Length: Aluminum / Drytex® / Nylon / PlasticFastening Type: Hook and Loop Strap Closure