| 162.16.0450.891.21.1503 Standard 5 Slewing Ring Bearings | misalignment angle:14 °; ball material:Alloy Steel Heat Tre; thread direction:Right Hand; housing material:Carbon Steel - corro; standards met:SAEJ1120; series:NF; grade:Commercial; radial static load capacity:2740 lbs; shank thread size:5/16-24; shank thread length:0.750 in; length to ball center:1.375 in; race material:PTFE Composite; lubrication:Self Lubricating; d:0.3125 in; operating temperature range:-40 to +275 &de; |
| 232.20.0800.013 Type 21/950.2 Standard 5 Slewing Ring Bearings | inside diameter:1-1/2 in; maximum v value:400; Weight:0.1829 lb; operating temperature range:-250 to 550 ºF; material specification:JLON 5500; thickness:1/8 in; plug type:No Plugs; manufacturer catalog:Click here; manufacturer upc number:717905199615; maximum pv value:20000; maximum p value:800; bearing material:PTFE BJ5; nominal overall length:1/8 in; D:3 in; |
| 60.22.0660.001.11.1503 Standard 5 Slewing Ring Bearings | manufacturer upc number:053893262390; closure type:Open; bearing material:Steel; D:4.6250 in; d:2.7500 in; assembly type:TS Assembly; |
| 161.20.0710.891.21.1503 Standard 5 Slewing Ring Bearings | operating temperature range:-35 °F to +; bearing material:Oil-Impregnated Bron; material specification:Oilite®, Synthet; maximum pv value:50000; standards met:SAE 841, CT-1000-K26; maximum v value:1200 (sfm); groove/plug type:None; sleeve bearing type:Plain Sleeve; D:1-3/4 in; manufacturer catalog:Click here; d:1-1/4 in; overall length:2-1/2 in; maximum p value:Static 8000 / D; |
| 62.25.1077.890.11.1503 Standard 5 Slewing Ring Bearings | manufacturer upc number:717905109775; maximum p value:400 psi; operating temperature range:-20 to 250 ºF; bushing material:Nylon; inside diameter:0.7500 in; manufacturer catalog:Click here; Weight:0.005 lb; bushing type:Plain; bushing outside diameter:0.8750 in; overall length:0.7500 in; maximum pv value:3000; |
| 11.20.0971.000.11.1504 Standard 5 Slewing Ring Bearings | dynamic load capacity:10200 lbf; lubrication hole type:Lubrication Groove &; series:NKS; D:65 mm; maximum rpm:8700 RPM; precision rating:Not Rated; needle bearing type:Machined Bearing wit; d:50 mm; standards met:DIN 617, ISO 1206, I; operating temperature range:Maximum of +250; closure type:Open; B:22 mm; flanges:With Flanges; static load capacity:16000 lbf; |
| 62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | bearing material:Oil-Impregnated Sint; maximum p value:2000 psi; groove/plug type:None; D:7/16 in; overall length:1/2 in; maximum v value:1200 fp/min; d:3/8 in; standards met:ASTM B438-73 Grade 1; maximum pv value:50000; sleeve bearing type:Plain Sleeve; material specification:SAE 841; |
| 61.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | manufacturer upc number:7316577343932; bore type:Round; housing material:Cast Iron; locking device:Set Screw; d:40 mm; |
| 230.20.1000.503 Type 21/1200. Standard 5 Slewing Ring Bearings | duty type:Medium Duty; mounting:Two-Bolt Base; standards met:UL, AFBMA, AGMA, ASM; bore type:Round; series:207; base width:1-3/4 in; seal type:Contact/Lip; overall length:6.5000 in; overall height:3.7500 in; locking device:Set Screw; D:4.68 to 5.44 in; finish/coating:Black Oxide; radial dynamic load capacity:5759 lb; lubrication type:Lubrication Fitting; B:1.71 in; housing material:Cast Iron; |
| 161.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | lubrication type:Non-Lubricated; d:0.4375 in; housing material:Carbon Steel; thread direction:Right Hand; race material:Brass; grade:Commercial; ball material:Case Hardened Carbon; rod end type:Male Threaded; |
| No. | Brand | f | b | a | G | B | D | V | C |
| 230.20.0900.503 Type 21/1050. | Standard 5 | - | - | - | - | 4.3800 in | 300 mm | - | - |
| 162.25.1120.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.0975.013 Type 110/1100.2 | Standard 5 | - | - | - | - | 23 mm | 72 mm | - | - |
| 62.20.0744.575.01.1403 | Standard 5 | - | - | - | - | 30.1 mm | 85 mm | - | - |
| 162.16.0450.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0450.101.21.1503 | Standard 5 | - | - | - | - | 3/8 in | 11/32 in | - | - |
| 161.20.0710.891.21.1503 | Standard 5 | - | - | - | - | - | 1-3/4 in | - | - |
| 92.20.1146.990.11.1503 | Standard 5 | - | - | - | - | 5.3800 in | 3.8900 in | - | - |
| 232.20.0800.503 Type 21/950.2 | Standard 5 | - | - | - | - | - | - | - | - |
| S20-125E1 | Rotek | - | - | - | - | 5.2100 in | 7.6000 in | - | - |
| 162.20.0710.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.16.0450.890.11.1503 | Standard 5 | - | - | - | - | - | 19.3750 to 21.6250 i | - | - |
| 162.16.0560.891.21.1503 | Standard 5 | - | - | - | W 55x1/19 | 11 mm | - | - | - |
| 62.25.1055.575.11.1403 | Standard 5 | - | - | - | - | 35 mm | 2-3/4 in | - | - |
| 61.25.0980.107.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.18.0748.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R10-125P1B | Rotek | - | - | - | - | - | 1-1/2 in | - | - |
| 61.20.0944.500.01.1503 | Standard 5 | - | - | - | - | 1/2 in | 7/8 in | - | - |
| 60.20.0944.500.01.1503 | Standard 5 | - | - | - | - | 3.5900 in | - | - | - |
| 61.20.0630.100.11.1503 | Standard 5 | - | - | - | - | 1.1811 in | - | - | - |
| 231.20.0900.013 Type 21/1050.1 | Standard 5 | - | - | - | - | 7 mm | 30 mm | - | - |
| 230.20.0400.503 Type 21/520. | Standard 5 | - | - | - | - | 5.8750 in | 4.3281 in | - | - |
| 161.25.0886.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0775.013 Type 21/850.1 | Standard 5 | - | - | - | - | 16 mm | 80 mm | - | - |
| 162.20.0560.890.11.1503 | Standard 5 | - | - | - | - | 67 mm | 200 mm | - | - |
| 162.25.1077.891.21.1503 | Standard 5 | - | - | - | - | 58 mm | 170 mm | - | - |
| 60.20.0744.500.01.1503 | Standard 5 | - | - | - | - | 4-7/8 in | 9-3/4 in | - | - |
| 161.16.0630.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0800.013 Type 21/950.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0544.500.01.1503 | Standard 5 | - | - | - | - | 78.6 mm | 113 mm to 125 mm | - | - |
250.14.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings Video
WCB three row roller slewing ring bearing by WCB BEARING
Nov 13, 2018 — 250.14.0400.013 Type 13/500. 3. 250.15.0300.013 Type 13/400 ... 13,5. 12. 29. ≤ 0,28. ≤ 0,24. 2. 060.20.0544.500.01.1503.
Rothe Erde® Slewing Bearings. - Yumpu
Except for Standard series KD 210, types 13 and 21. Table 1. Service Time ... 250.14.0400.013. Typ 13/500. Unhardened. raceway ... 1048 44/48 13,5.
Wcb Turntable Bearing China - Calaméo
For bearings with similar dimensions as type 21, but with higher load ... 348 298 ≤ 0,5 ≤ 0,5 raceway Typ 13/400 1 250.14.0400.013 Typ 13/500 421 13,1 501 ...
rothe erde® Groß- wälzlager
250.14.0400.013. Typ 13/500 ... 13,5. 12. 77. ≤ 0,30. ≤ 0,26. Werden Zentrie- rungen gewünscht, so sind diese bei ... Beispiel type ES 36. Standard.122 pages
Standard series KD 600 - StudyLib
Rothe Erde Slewing Bearings Bearing design types Basic information Pages 6 – 41 ... Hardened raceway 250.14.0400.013 Typ 13/500 Internal bolt circle dia.
Rothe Erde Slewing Bearings - Rotek Inc.
006 thyssenkrupp Rothe Erde GmbH 016 Bearing types ... 250.14.0400.013. Type 13/500 ... 13,5. 12. 77. ≤ 0,30. ≤ 0,26 centering spigots are required, these.
Rothe Erde® Großwälzlager. - Vansichen
zahl der Type 21. Ist eine Zentralschmierung vorgesehen, ... 250.14.0400.013. Typ 13/500. 250.15.0300.013 ... 13,5. 13,5. 13,5. 13,5. 13,5. 13,5. 13,5.194 pages
Rothe Erde® Slewing Bearings.
KD 210 standard bearing types 21 and 110 are available without gear with external gear ... 250.14.0400.013. Typ 13/500. 250.15.0300.013. Typ 13/400 ... 13,5.194 pages